Diversey High Mileage Floor Finish

High Mileage Floor Finish delivers excellent gloss build and outstanding durability, even in the heaviest traffic, on all resilient floors. The extreme durability in high-traffic areas means it resists dirt, black heel marks and scratches exceptionally well. Extended recoat and stripping cycles yield labor savings and overall improved productivity. Install up to five coats in one night. Specially designed with high solids and low odor, formula builds durability over time. Nonyellowing floor finish maintains excellent clear color.

• Blockade areas to be stripped or finished. Floors will be very slippery until dry.
• Strip floors, using a Diversey stripper per the instructions on the stripper label

• Apply 3 or more medium coats using a clean finish mop or the Diversey ProSpeedTM/MC or TrailBlazerTM/MC Floor Finish Applicator System. Apply additional coats until desired gloss is obtained.
• Allow 30-45 minutes drying time between coats. Temperature, humidity and ventilation may affect drying time. Allow finish to cure for 24 hours before burnishing.

• Dust mop or sweep. Clean the floor with a mop or an automatic scrubber using the recommended Diversey brand cleaner according to label directions.
• If desired, dry buff using medium to aggressive pad and 1000- 500 rpm equipment. Ultra-high speed burnish using a medium aggressiveness pad and 2000+ rpm equipment.

• Dust mop or sweep Clean the floor with a mop or an automatic scrubber using the recommended Diversey brand cleaner according to label directions
• Blockade area and apply 1-2 uniform coats of finish using a clean finish mop or the Diversey ProSpeedTM/MC or TrailBlazerTM/MC Floor Finish Applicator System. Allow finish to cure for 24 hours before burnishing.

• Remove using recommended Diversey brand stripper following label directions

• Do not dilute. Do not use on surfaces colder than 50°F (10°C) @ 15% RH. To avoid contamination, do not return unused finish to original container. Do not freeze.